AquaClear SF- Water Biocide Economy Pack, 24 Ea

AquaClear SF is a highly soluble preserving compound, whose properties are ideal for a broad spectrum of biological conditions that are involved in the decomposition of water. Used in the right concentration, it is highly effective against bacteria and fungi. It is also non-hazardous and its environ-mentally friendly formula does not require you to follow special disposal instructions. This formula has also been enhanced by the addition of special cleaning agents, that will contribute to make subsequent cleaning easier to perform by reducing the effect of microorganism build-up around the bath walls, as well as provide secondary protection to units with re-circulating systems. Its preserving properties are maintained even in other anionic, cationic, and most non-ionic systems not intended for human consumption. Additionally, AquaClear SF is clearly effective against Pseudonomas and Aureginosa, but since it is less effective in alkaline systems, and for best results, it is recommended that it be used only with de-ionized water. AquaClear SF is the only proven biocide solution to the tedious and expensive task of maintain optimum water bath integrity. Applications Specifically designed to extend the life cycle of water in dissolution baths. Solubility Fully dispersed and dissolved at 37º C within 30 minutes. Use gentle agitation. Dosage One 15 gm dose will protect water for up 8 weeks. Static systems can be treated with same dose quantity. Safety Avoid direct contact with skin. Immediately wash any contacted skin area with water. All active ingredients in AquaClear SF have been FDA and EPA registered and approved. Detailed safety information available through MSDS. Storage Store in original container in a dry area at temperature below 27º C (80º F) away from oxidizing materials, sources of ignition, and direct exposure to sunlight. Click here for Technical Data Sheet.